QW-588 eva wear-resistant agent

Widely used in EVA,IP/CMP; Improve the sticking due to material release. Adding it to the traditional midsole formula can reduce the vulcunization time of two molding.

Ingredients: A variety of alcohol amine active agents and vinyl acetate copolymer

Appearance: white granule

Specific gravity: 1.55 ± 0.1g/cm3

Packing: 25kg / bag.

Function:

1. Adding this eva wear-resistant agent in the injection EVA formula can maintain the cleanliness of the mold surface for a longer time and improve the performance of the film adhesive

2. Adding this eva wear-resistant agent from China factory will improve the tensile strength, rigidity and impact resistance of the product.

3. China eva wear-resistant agent manufacturer is added to the traditional midsole formula to increase the thermal deformation strength and reduce the risk of foaming in the formation.

4. Adding eva wear-resistant agent from China manufacturer to the traditional midsole formula can reduce the vulcunization time of two molding.

5. Improve the surface gloss and physical mechanical properties of products.

Amount added:

1. Improve film adhesive performance 2 ¡« 4 PHR

2. Improve physical performance 4 ¡«6 PHR

How to use EVA wear-resistant agent

EVA Wear-Resistant Agent (EVA) is a chemical agent that has been created to help prevent wear and tear on the surface of metal. It is used in cases where the amount of metal is too thin to use traditional adhesives. EVA is a liquid chemical agent which “bends” the metal surface to adhere it to the surface. It can be applied directly onto the surface or it can be applied in the form of an adhesive powder or glue.

The process of applying EVA is quite simple: Apply it directly onto the surface with a brush or brush-on applicator, wait for 30 minutes (the time required to dry completely), and then remove with warm soapy water. The product may also be applied by using sprayers or by using a sponge applicator.
As with any other chemical application on metals, care should always be taken when handling chemicals that are harsh on skin and eyes.

request a quote